إنتقل إلى المحتوى الرئيسي

Hardware Hacking

40 hours 7 Modules 20+ Labs Intermediate to Advanced

Course Description​

Hardware hacking opens doors that software can't. Learn to extract firmware, exploit debug interfaces, and attack embedded systems.

Learning Objectives​

  1. Identify hardware attack surfaces
  2. Extract firmware from devices
  3. Exploit UART and JTAG interfaces
  4. Analyze embedded systems
  5. Bypass hardware security
  6. Build hardware hacking tools

Course Structure​

Modules​

Module 1: Hardware Fundamentals (5h)​

  • Electronics basics
  • Common components
  • PCB analysis
  • Tool setup

Module 2: Debug Interfaces (7h)​

  • UART identification
  • JTAG/SWD basics
  • I2C/SPI sniffing
  • Debug interface exploitation

Module 3: Firmware Extraction (7h)​

  • Flash chip reading
  • EEPROM dumping
  • In-circuit extraction
  • Vendor update analysis

Module 4: Firmware Analysis (7h)​

  • File system extraction
  • Binary analysis
  • Hardcoded credentials
  • Vulnerability identification

Module 5: Embedded Exploitation (6h)​

  • Buffer overflows on embedded
  • Command injection
  • Authentication bypass
  • Firmware modification

Module 6: Radio & Wireless (5h)​

  • RF basics
  • SDR usage
  • Protocol analysis
  • Replay attacks

Module 7: Physical Security (3h)​

  • Lock picking basics
  • Badge cloning
  • Safe cracking intro
  • Tamper detection bypass

Tools​

ToolPurpose
Bus PirateProtocol analysis
Logic AnalyzerSignal capture
JTAGulatorDebug discovery
FlashromChip reading
BinwalkFirmware analysis